Carburetors for old Dodge Trucks : DODGE TRUCKS 1935Previous | Home | Next |
 |
DODGE TRUCKS, 1935 Page 3
48 2 49.89
0 © T 1
86-11 66.17 1014 101-10
121.17
2-80
17-30
61-72 101.58
159.38
3.2095
42525
20-31 0 20©37
63-25
O
IOSA-10
116-13
117.25
1Ut
61-84
61.85
117-35 160.21
61.61
61-71
Win
121-30
123-165 145-25S
39-11
38A-26
30A-37
162.10
'
160-24
160-22 S
160.235
7.625
T
101-12
T
101-55
T
101-57
1-125 S
1A43
IA32
1116 1155
11B-31
At!. _,momsipplapsn
141735
150A-13
Dodge Trucks—"KC-KCL"—1935—Nos. B6EI & B6E2—List
Price $22.05
(WHEN REPLACING ORIGINAL EQUIPMENT CARBURETER No. B6EI, INSTALL No. B6E2)
All Prices Subject to Prevailing Surcharge
Part No. PARTS PRICE LIST List Price
I-1255 Body flange assembly 3.70
IA-32 *Flange gasket (for use with governor) steel-
bestos 1-5/32" hole 09
IA-33 Flange gasket (for use without governor) steel
bestos 1-5/32" hole 09
2-80 Throttle valve 30
3-2095 Throttle shaft and arm assembly ....: 90
4-252S Throttle lever assembly 60
6-120S Air horn assembly 3 70
7-52S Choker valve assembly 75
IIB-16 Pump jet plug 15
IIB-3I Idle hole plug 15
IIB-40 Rivet plug (Sup. by IIB-79) 04
IIB-4I Rivet plug 04
IIB-55 Needle retainer plug 07
IIB-79 Rivet plug 04
I4-1735 Choker lever and shaft assembly 60
17-30 Pump piston needle 20
20-31 Needle seat gasket 07
20-32 Metering screw gasket 07
20-37 Step-up piston washer 07
2I-49S Float and lever assembly 1 20
24-19S Float lever pin and plug assembly 15
25-48S Needle and seat assembly 1 20
30A-37 Idle adjustment screw 45
38A-26 Step-up passage bushing 07
39-11 Valve attaching screw 2 for 07
48-42 Pump jet .0276" 20
49-89 Step-up push rod 15
49-99 Pump piston rod 04
61-58 Throttle lever adjusting screw spring 07
61-61 Step-up spring 07
61-71 Choker spring 15
61-72 Choke pull-back spring : 15
*This (gasket to be installed between carbureter and governor when governor
is installed. Oriqinal flange gasket to remain between governor and manifold.
When servicing B6EI carbureter, install Main Vent Tube and Plug Assembly 145-25S
to bring B6EI to B6E2 specifications.
Part No. PARTS PRICE LIST List Price
Idle adjustment screw spring 07
Pump spring _ 15
Choke tube bracket assembly 75
Retainer washer 07
Lock washer (11/64" I. D.) (Use with 101-6) 02
Lock washer ( 9/32" I. D.) 02
Lock washer (15/64" I. D.) (Use with 101-55) 02 Choke bracket attaching
screw (Sup. by
10 I - 142S) .07
Wire clamp screw 07
Throttle lever clamp screw 07
Air horn attaching screw (Sup. by 101-1465) 07
Flange attaching screw 07
Throttle adjusting screw 07 Choke bracket attaching screw and washer ass'y
.07
Air horn attaching screw and washer ass'y 07
Choke tube clamp nut 07
Ball • .- --------------- .04
Pump operating link 20
Pump connector link 15
Body gasket 15
Body flange gasket •--- 07
Idle orifice tube and plug assembly 30 *Main vent tube and plug assembly (superseded
by 145-25S) 30
*Main vent tube and plug assembly 30
Step-up valve assembly 60
Pin spring 02
Main metering screw—standard 45
Pump piston 20
Pump piston, needle and prug assembly 45
Step-up piston assembly 45
Pump piston (outer) 60
Step-up jet (power orifice) 15
61-84 61-85 62-75S 63-25 86-10 86-II 86-17 101-6
101-10 101-12 101-55 101-57 101-58
I01-1425 101-146S 105A-10 116-13
117-25 117-35 121-17 121-30 123-18S 145-18S
145-25S 149-I IS 150A-13 159-38 160-21 160-22S 160-235 160-24 162-10