Carburetors for old Dodge Trucks : DODGE MODEL DV 1935Previous | Home | Next |
 |
CBDI
7.525
( 3-2435
17-30
4.2525
20.37
4A-48
6.120S
24.195 25-48S
20-31 20.32
38A-26 39-11
12137
V
48-39
100
101-12
123.18S 145.185
101.54 149395
14-1735
11B-16 11B-27 11B-55
14-17.5
61.61
49-99
30A-37
101-6
86.17
86-10 86-11
1 5
Ip
150A-13
159-48 159.49
159-50
1A-23
1A30
2-86
1-127S
61.72
11736
117.35
11530
121-17
183-14
162-22
160.225
160-23S
160.21
160-24
Dodge "DV"-1935-No. COI-List Price $22.05
WHEN SERVICING, USE GASKET ASSORTMENT No. 619-LIST PRICE $0.50; REPAIR PARTS
PACKAGE No. I008A, PRICE $4.55
All Prices Subject to Prevailing Surcharge
PART NAMES IN BOLD TYPE, LISTED BELOW, INDICATE CONTENTS OF REPAIR PACKAGE
Part No. PART NAME List Price Par+ No.
-1275 Body f ange assembly .... $3.70 61-72
IA-23 *Flange gasket (with governor) steelbestos- 61-84
1 /4 inch S. A. F .09 61-85
IA-30 Flange gasket (without governor) steelbestos- 62-75S
1 X14 inch S. A. E .09 63-25
2-86 Throttle valve .30 86-10
3-243S Throttle shaft and arm assembly .90 86-II
4-252S Throttle lever assembly .60 86-17
4A-48 Throttle shaft dog .30 101-6
6-1205 Air horn assembly 3.70
___________ ----
- .. 101-10
7-5,5 Choker valve assembly .75 101-12
IIB-16 Pump jet plug .15 101-54
I I B-27 Idle hole plug .15 101-55
1 I B-40 Rivet plug .04 101-58
I B-41 Rivet plug .04 I05A-10
1 I B-55 Needle retainer plug . .07 115-30
4- 173S Choker lever and shaft assembly .60 I 16-13
14-175 Choker lever (superseded by 14-184) .15 117-35
14-184 Choker lever .15 117-36
17-30 Pump piston needle .20 121-17
20-3 I Needle seat gasket .07 121-37
20-32 Metering screw gasket .07 I23-18S
20-37 Step-up piston washer .07 145-18S
21-49S Float and lever assembly ____ 1.20 149-39S
24-195 Float lever pin and plug assembly .15 150A-I3
25-48S Needle and seat assembly 1.20 159-48
30A-37 Idle adjustment screw .45 159-49
38A-26 Step-up passage bushing .07 159-50
39-11 Valve attaching screw. 2 for .07 160-21
48-39 Pump jet, .0315" .20 160-22S
49-89 Step-up push rod .15 160-23S
49-99 Pump piston rod .04 160-24
61-58 Throttle lever adjusting screw spring .07 162-22
61-61 Step-up spring .07 183-14
61-71 Choker spring .15 183-16
PART NAME List Price
Choke pull-back spring .15
Idle adjustment screw spring .07
Pump spring .15
Choke tube bracket assembly . .75
*Brass retainer washer .07
Lock washer (11/64 inch I. D.) .02
Lock washer ( 9/32 inch I. D.) .02
Lock washer ( 15/64 inch 1. D.) .02
Choke bracket attaching screw .07
Wire clamp screw .07
Throttle lever clamp screw A7
Flange attaching screw 07
Air horn attaching screw . .07
Throttle adjusting screw .07
Choke tube clamp nut ... .07
Choker connector rod .20
Ball .04
Pump connector link .15
Pump operating link .20
Body gasket 15
Body flange gasket .07
Idle orifice tube and plug assembly .30
Main vent tube and plug assembly .30
Siep-up valve assembly .60
Pin spring .__._._ .___.__.___. .02
Main metering screw-standard _ .45
Main metering screw-I size lean .45
Main metering screw-2 sizes lean .. .45
Pump piston .20
Pump piston, needle and plug assembly. .45
Step-up piston assembly .-. .45
Pump piston (outer) .. .60
Step-up jet (power orifice) .15
Insulator (superseded by 183-16) .50
Insulator .50
*This gasket to be installed between carbureter and governor when governor is
installed. Original flange gasket to remain between governor and manifold.
'Not used on first production carbureters. Early production units equipped with
non-removable brass retainer washer for pump ball check.
List price of $4.40 per 100 applies to parts listed at $0.07 each. List price
of $1.85 per 100 applies to parts listed at $0.04 each.
List price of $2.55 per 100 applies to parts listed at $0.05 each. List price
of $0.75 per 100 applies to parts listed at $0.02 each.